Below, we've provided a number of free resources which are available for you to download. We hope that these resources will help to enhance your train simulation experience. Should you have any questions regarding these downloads, please feel free to contact our technical support department at any time.

• Steam Works 3d Trainz Downloads Full
• Steam Works 3d Trainz Downloads Pc
• Steam Works 3d Trainz Downloads Download

Downloads: MSTS: Trainz: United States - Steam Railway American Freedom Train Locomotive GS-4 4449 Designer Rick Grout Source www.gtraxsims.com: Note. Here is where our locomotives for Trainz are released and made available for download. All locomotives are for TS2009 upward unless stated otherwise. Rules and Notes Reskinning is allowed so long as you give credit where it's due, although if you'd like to release your reskin then you can ask for permission at max31champion@aol.com.

Official RailDriver® Boxcar
rd.boxcar.zip (466 KB)

A U.S. boxcar with a RailDriver® paint scheme, this car is set to deliver new consignments of the RailDriver® Desktop Train Cab Controller. Modeled with three-dimensional ribbed sides and a roof from the RailDriver® Car Builders Cyclopedia, this car has a reasonably high poly count. Still, large trains of these can be run. As a freeware model, feel free to share it with your friends.

RailDriver® Cab Views

The following cab views were created using Train Sim Modeler. To place one of our cab views into an MSTS engine, please follow these simple steps:

1. Download the .zip file and extract it to your hard drive.
2. Copy files from our '*cabview' folder.
3. Paste those files to 'cabview' folder of the MSTS engine.
4. Open the '*.eng' file for the MSTS engine in WordPad.
5. Open 'Find' function in WordPad, enter 'cvf', and click 'Find.'
6. This line should show up: Cabview (*.cvf).
7. Replace name of the .cvf file with name of the new .cvf file.
8. Open the engine in MSTS. The new cab view will be active.

10-Wheel 4-6-0 Cab View
10.wheel.4.6.0.zip (2.93 MB)

Based on the 10-Wheel 4-6-0 by Baldwin Locomotive Works. For use with the MSTS Gölsdorf or Scotsman, or your own custom steam engine.

Berkshire 2-8-4 Class N Cab View
berkshire.2.8.4.zip (3.40 MB)

Based on the Pere Marquette 1225 by Lima Locomotive Works. For use with the MSTS Gölsdorf or Scotsman, or your own custom steam engine.

A special thanks to both Dennis Braid and The Michigan State Trust for Railway Preservation, Inc.

RailDriver® Modified Engine Files

RailDriver® Series 7000 ENG File
rd.series.7000.zip (5.71 KB)

File contains MSTS .eng and .con files for a modified version of the Series 7000 train, which allow the RailDriver® Desktop Train Cab Controller to work with this engine. Instructions are included in the attached 'readme' file. You should only install this patch if you are running a Series 7000 cab with the RailDriver®.

RailDriver® Class 50 ENG File
rd.class.50.zip (4.57 KB)

File contains a modified MSTS .eng file for the Class 50 Cab, which will allow the RailDriver® Desktop Train Cab Controller to work with this engine. Instructions are included in the attached 'readme' file. You should only install this patch if you are running a Class 50 cab with the RailDriver®.

Michigan Lakes Route for TRS 2004

While testing RailDriver® on Trainz 2004, we created our own virtual railroad. Now we're sharing it, and hope you have as much fun running it as we did making it. We decided to make the route available to you as a free download, along with some extra trains and a session that is sure to test your skill as a dispatcher.

Michigan Lakes Downloads

All three parts must be downloaded in order to run the session. In addition, Auran PaintShed is required for the proper display of our custom engines and rolling stock.

Michigan Lakes Route
mi.lakes.route.cdp (3.7 MB)

Michigan Lakes Session
mi.lakes.session.cdp (44.0 KB)

Michigan Lakes Trains and Rolling Stock
mi.lakes.trains.stock.cdp (2.3 MB)

The Michigan Lakes Route

Covering 99 baseboards, this route is bordered by the Great Lakes and other smaller lakes, which are so often found in Michigan. Having industry mixed in with pine forest and deciduous woods makes this route look like it could be anywhere in Michigan. In addition, we pulled the place names from our local area, and had a bit of fun with them. The layout is set so that many trains can be run simultaneously, and the drivers rotated around. We tried to make it easy to set up a routine and then run it for hours.

The Michigan Lakes Session

The Michigan Lakes session requires you to download the route, the session, and the trains. The basis of TRS 2004 'situations' is that you can run all the industries and keep them fed using all of the resources you have. Just to make things interesting in this session, the lumber industries and the forest are at opposite ends of the layout — giving you plenty of work to keep things running.

For example, schedule a run between the coal mine and the power station to keep electricity flowing. The trick here, after you get the train to the power station, is to unload and move the train around to the exit points. These settings are under the 'driver to trackmark' section for your driver. If you do not use all of your coal, detach full coal cars and return the empty cars to the mine. Power station switchers can move remaining cars for unloading.

The Michigan Lakes Trains

Below you can see the selection of locomotives and rolling stock that we provide to help you fulfill your tasks. They have all been painted in either RailDriver® or Michigan Lakes Railroad color schemes. These were made using Auran's PaintShed tool, which is required to run these trains and the Michigan Lakes session.

Feel free to click on the above thumbnails to see larger images. We provide three SW7 switchers: MLRR Forestry, MLRR in house colors, and MLRR in RailDriver® colors. In addition, you get SD40 and GP38 diesels, the RailDriver® boxcar, and water tankers.

Default RailDriver® Key Legends
rd.legends.pdf (7.9 KB)
rd.legends.doc (35.0 KB)

These documents contain a set of three default key legends for running MSTS or Trainz with the RailDriver® Desktop Train Cab Controller. The files are available in PDF format, or Microsoft Word format for editing and adding custom touches.

Custom RailDriver® Key Legends for TRS 2004
rd.trs.2004.legend.pdf (43.9 KB)
rd.trs.2004.legend.doc (23.5 KB)

These documents (thanks to customer Robert Oster) contain a key legend for running Trainz 2004 on the RailDriver® Desktop Train Cab Controller. The files are available in PDF format, or Microsoft Word format for editing and adding custom touches.

Book Reproductions

RailDriver® Modeler's Toolkit
rdmodkit.zip (50 KB)

Make yourself a RailDriver® compatible locomotive. This modeler's toolkit gives you the resources to produce a Microsoft Train Simulator (MSTS) engine file that is entirely compatible with the RailDriver® Desktop Train Cab Controller. If you would to know more, please click here.

Steam Works 3d Trainz Downloads Full

Mogul 2-6-0 Component Parts for Train Sim Modeler
tsm.parts.zip (11.8 MB)

At RailDriver®, we've created these components to model an MSTS steam cab. We're pleased to share them with you and ask for nothing more than your undying gratitude. To download individual parts, please click on the links provided below:

Steam Works 3d Trainz Downloads Pc

Sample Digital Images
1922 Locomotive Cyclopedia

Steam Works 3d Trainz Downloads Download

We've provided some samples from one of our RailDriver® cyclopedias. The real images in the cyclopedia were scanned at 600 dpi and would take hours to open with a dial-up connection, so we've reduced the resolution and compressed these for you.